YANHUA MINI ACDP BMW FULL PACKAGE KIT
1:Support CAS1-CAS4+IMMO key programming and mileage reset through OBD mode.
2:Support CAS3+/3++,CAS4/4+key programming and mileage reset by ICP. Data reading and writing without lifting the pin. No removing any components. Intelligent detection.
3:Support CAS1-CAS4+ data restore.It can modify vehicle frequency, VIN, ISN code,or replace CAS module by modifying EE data.
4:Support OBD restore CAS3/CAS3+/CAS3+ problem caused by downgrade.
5:Support CAS1-CAS4+ Read/Write eeprom and Flash data.
6: Support FEM/BDCIMMO key programming and mileage reset. Fully automatic mode matching.Safe,reliable and fast.
7:Support FEM/BDC module restore,FEM/BDC backup and write anti-theft data at the same time.
8:Read the requested ISN code when making BMW all key lost.
9:Read ISN codes of N20/N55/N13 by OBD or without openning the DME shell.
10: Read ISN code of MSV70/MSV80/MSD80 without opening the DME shell.
11:Read ISN code of other models(B38, etc.) by opening theshell.
12:Read ISN code of MSV90/B48 by OBD. (Additionalpurchase of interface boards is required)
13:Read &Write ISN code on Bench. Support full versions of N13/N20/N63/S63/N55/B38 etc.(Additional purchase of Bench interface boards is required)
14:Ecu Clone. Support BMWN13,N20,N63,S63,N55 and B38 Dflash and Pflash reading/writing. (Additional purchase of Bench interface board and authorization is required)
15: Support erase/adjust mileage of 080DOWQ/T,160DOWQ/T,M35128WT eeprom.
16:Refresh BMWE chassis/F chassis (CAS) key to make BMW keys can be used repeatedly.
17: Repair (FRM) Footwell module (3M25Jchip) data without coding.
18. Support BMW 6HP F Chasis garebox refresh and cloning. support 8HP F/G Chassis gearbox refresh
Module1/2/3/4/7/8/11 BMW Full Package Includes as below:
1. MINI ACDP Basic Module
2. CAS Module (Module1)
(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
3. FEM/BDC Module (Module2)
Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
4. ISN Module (Module3)
Read/write N20/N55/N13 ISN code via OBD.
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
5. Read and write BMW M35080, 35160DO WT etc EEPROM (Module4)
Read and write BMW M35080, 35160DO WT etc EEPROM, erase 080DOWQ, 080DOWT, 160DOWQ, 160DOWT, M35128 models.
6. Refresh BMW Keys (Module7)
Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.
7. Yanhua Mini ACDP Module8 BMW FRM Footwell Module (Module8)
Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
The advantage of BMW FRM of ACDP: Integrated data reading/writing, data conversion in one programmer; no need to write other cars'data; no need to coding. Simple and efficient.
8. Module 11 BMW gearbox EGS ISN clearance
BMW 6HP/8HP gearbox EGS ISN clearance
Yanhua Mini ACDP Highlights:
Test car NO longer needs engines
YANHUA car keys programming NO longer need soldering iron
Car locksmith NO longer needs soldering work.
The first in the world
Programming no need soldering
Yanhua Mini ACDP IMMO/Mileage Programming
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin
Module1 BMW CAS1-CAS3+Key Programming via OBD
Read CAS EEPROM
Add Keys
Reset Mileage
Back up or recover CAS
All keys Lost
Module1 BMW CAS4/CAS4+
Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Mileage without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding
Module2 BMW FEM/BDC
All keys lost without soldering/welding
Add keys without soldering/welding
Delete Keys without soldering/welding
Enable/Disable keys without soldering/welding
Read Key ID
Repair/Replace FEM Module without soldering/welding
Reset Mileage without soldering/welding
Module3 Read and Write ISN Code
N20(mevd1724, mevd172P, mevd1729), N13(mevd1725, ), N55(mevd172, mevd1726, mevd172G, mevd172S, MEVD17, ), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728(s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX….
Module4 BMW 35080, 35160DO WT Read & Write
Read and write BMW M35080, 35160DO WT etc EEPROM
Module7 Refresh BMW Keys Module
Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.
Please refer to our official blog: How to use Yanhua Mini ACDP refresh BMW keys
Module8 BMW FRM FRM Footwell Module
Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
Please refer to our official blog: How to use Yanhua Mini ACDP do BMW FRM programming
Module 11 BMW gearbox EGS ISN clearance
BMW 6HP/8HP gearbox EGS ISN clearance
USD
