Black |
|
Red |
|
LAUNCH X-PRO G 3 Immobilizer Programmer is a anti-theft product, which is powerful in reading and writing chip.
It is mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, Benz infrared key generation, special key generation, BMW engine ins code reading, BMW cas4 + / FEM chip reading and writing, etc.
It can be used with a variety of comprehensive diagnostic equipment, without binding, flexible, stable and reliable products.
It is suitable for automobile electronic industry / locksmith / maintenance factory and other professional users.
Launch X-PROG 3 Features
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
Advantages
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Core Functions
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
Launch X-PROG 3 Advanced Immobilizer & Key programming Module Specification:
Interface
|
DB26, DB15
|
Input Power
|
DC12V
|
Working CurrentMax
|
500mA
|
Power Consumption
|
5W
|
Storage Temperature
|
-20℃~70℃
|
Working Temperature
|
0℃~50℃
|
Size
|
228*120 mm
|
Launch X-PROG 3 Compatible With Multiple X-431 Series Diagnostic Tablet:
X431-Throttle, X431-Throttle III, X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X431 Pros, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Launch X-PROG 3 Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
Atmel
Fujitsu
Infineon
MC68HC05
MC68HC08
MC68HC11
MC68HC12
MediaTek
MicroChip
Nordic
NSC
Philips
Renesas M16
Renesas M32
Renesas M32R
Renesas R32C
Renesas R8C
Renesas V850 SPI
Renesas V850 UART
Samsung
SiLabs
Supported EEPROM Brands:It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
4Wire
Adesto
AKM
Altera
Amic
Atmel
BOSCH
Catalyst
Chingis
Dallas/Maxim
EON
ESMT
EXEL
Fairchild
GI
GigaDevice
Grundig
HOLTEK
Hynix
12C
ITT
KHIC
Macronix
MicroChip
Micron
MicroWire
Mitsubishi
Motorola
Numonyx
OKI
ON Semi
Other
PCT
Philips
Pioneer
PMC
Ramtron
Rohm
Samsung
Seiko
Siemens
Sony
SST
ST
Toshiba
Winbond
Xicor
XUSSR
YMC
Spansion
SPI
NEC
NSC
Ford
Fujitsu
X-prog3 ECU TCU Clone Function Only with high-end tablets (PAD5, PAD 7, PRO5, IMMO PLUS etc)
TCM
ECU Name |
ECU Type |
ECU Brand |
EDC16XX |
ECM |
Bosch |
EDC17XX |
ECM |
Bosch |
MDICSXXX |
ECM |
Bosch |
MD1CPXXX |
ECM |
Bosch |
ME17.X.X |
ECM |
Bosch |
MED17XX |
ECM |
Bosch |
MEV17.XX |
ECM |
Bosch |
MEVD17.X.X |
ECM |
Bosch |
MG1CSXXX |
ECM |
Bosch |
MG1CPXXX |
ECM |
Bosch |
MSDXX |
ECM |
Continental/Siemen |
MSVXX |
ECM |
Continental/Siemen |
SDIX |
ECM |
Continental |
GM EXX/TXX |
ECM |
DELCO |
SIM271XX |
ECM |
Continental |
SIMos 8X |
ECM |
Continental |
6HPXX |
TCM |
ZF |
8HPXX |
TCM |
ZF |
7DCT300 |
TCM |
ZF |
9G Tronic |
TCM |
Bosch |
ALxXX |
TCM |
ZF |
DPS6/DC4 |
TCM |
GETRAG |
DKG |
TCM |
GETRAG |
DLxXX |
TCM |
Temic |
DoxXX |
TCM |
Temic |
MPS6 |
TCM |
GETRAG |
VGSX |
TCM |
GETRAG |
VL381 |
TCM |
Temic |
GM 6TXX/6LXX |
TCM |
DELCO |
XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Launch X431 X-PROG vs. X-PROG3
Item |
Launch X431 X-PROG
|
Launch X431 X-PROG3
|
Read/Write EEPROM |
No |
Yes |
Read/Write MCU |
No |
Yes |
Mercedes Benz Keys |
No |
Yes |
Key simulator |
No |
Yes |
VW 4th IMMO Dump Mode All Keys Lost |
No |
Yes |
Read engine in Bench mode |
No |
Yes |
VW 4th IMMO enumeration all keys lost |
No |
Yes |
Read gearbox data |
No |
Yes |
Read and write keys |
Yes |
Yes |
Read BMW engine ISN code |
No |
Yes |
Replace OBD reading component |
Yes |
Yes |
Read & Write BMW CAS4+ and FEM chips |
No |
Yes |
Read engine in Boot mode |
No |
Yes |
Read & Write Audi 5th generation steering column chips |
No |
Yes |
Specification |
Interface |
DB15 |
DB15,DB26 |
Input Power |
DC12V |
DC12V |
Working current Max |
200mA |
500mA |
Power consumption |
2W |
5W |
Storage Temperature |
-20℃-70℃ |
-20℃-70℃ |
Working Temperature |
-10-50 0℃ |
0-50℃ |
Size |
142 x72 (mm) |
228 x120 (mm) |