for Ford Focus Mondeo Steering Lock Emulator C1 CD4 Platform ESL ELV Simulator - Plug and play - No Need Programming

We have Ford Steering Lock Emulator Simulators below:

Model #01_Ford Focus C-Max Kuga Steering Lock Emulator Simulator
With Lock Sound.

Plug and Play, No Programming Required.

Compatible with Ford C1 Platform Cars ( Focus MK2 , C-MAX etc) Stating form 2012 & UP, the Original Steering Lock which with black connector

Compatible models: 

• • Ford Focus 2012+
  • Ford C-Max 2012+
  • Ford Kuga 2012+

Model #02_Ford Mondeo MK5 2014 S-Max MK2 Galaxy MK4 2016 Steering Lock Simulator Emulator
With Lock Sound.

Plug and Play, No Programming Required.

Compatible with Ford CD4 Platform Cars ( Mondeo , S-Max Galaxy etc) Stating form 2014 and up.

Original SCL Number Looks Like Av6N-3F880-Kx , Connector has 4 Pins

Fit for models: 

• Ford Mondeo 2014
• Ford S-MAX 2016
• Ford Galaxy 2016

What is Steering Lock Emulator?

Why Buy Steering Lock Emulator?

• Steering lock problem Is one among the foremost frequent problems in vehicle starting system, ELV Is a Self-occurring mechanical failure in the steering column lock. The occurrence of the fault does not depend on any fault. In case of malfunction, even If there Is no problem in the vehicle key, the working key can not start the vehicle because the ELV steering column lock can not be activated.
  
  

  • In this case, a new ELV steering column lock must be installed and programmed into the Vehicle. Car dealer need to order new steering lock and program it which is just too much costly and required while of waiting.
    
    

• Instead of buying a new elv module, buy an electronic steering lock emulator will fix your steering lock malfunction error, and therefore the ESL ELV universal steering lock emulator will bypass ELV always. No require coding, simply connect it , and it'll fix fail ESL.

Car Steering Lock Emulator Installation Steps:

1. 1. 1. Turn off the ignition switch.
      2. Plug the connector into the emulator socket.
      3. The SCL works only when it receives an open and close command.
      4. Emulator successfully installed.
      5. Push the start button and the green led should light. If a red led blinks, there is an error you have to correct by a diagnostic tool or you can reset the car by plugging the battery out and in again and again till the green led light.

         
         
         Ford ESL Simulator Emulator Light Behavior:

         • Red SCL is in Locked State.
         • Green SCL is in Unlocked State.