(15 Minutes) ODIS Geko User Online Login System for VW/Audi/Skoda/Seat

Important: 
You will have 4 Times login limit within 15 minutes.

You will have 15 Times login limit within one hour(Audi).

--Buy in advance, use it when you need:
Timer will start counting down only after the first login successfully and it will not stop whether you use it or not.

ECUTOOL OD.IS GeKo Online Login Service for Volkswage*n Aud.i Skod.a

CPN proxy has been intergrated with the GEKO LOGIN SYSTEM. 

With the GEKO online system, you can perform special functions as a dealer level below:

– Component Protection removal
– Perform Online Coding, Immobiliser coding, ECU programming...
– Load Parameters Online
– Online Adaptation and Calibration
– SVM Activations
– Access Circuit Diagram
 

Attention:
-- You need Odis Service Software, 5054/6154 diagnostic tool, PC Windows 7 or 10/11 to access above services and functions.

ECUTOOL GEKO SERVICE Features:

-All odis veriosns are supported.
- Multiple Subscription Modes Available:On the basis of your actual demand, Pay license per hour, per day

- Easy Setup & Use:After program finishing setup, No need waiting remote enter, you can log in by yourself.

- No Shipping Cost:Directly setup the login system (we can help you via team viewer remote support if you want) on the first use. Later only need to pay for the new license code to recharge

How GEKO ONLINE SYSTEM works?

1. For the new customer the first use our system

• 01. Click here to download geko login system (we can help you via team viewer remote support if you want) .

• 02. Contact us by email or WhatsApp and Skype after finishing installation, we will give you a reg code.

• 03. Use the REG code to login in the Odis login windows.

2. For return customers, only need to pay for the new license code to recharge.
 

- Pls check your odis brand setting of connection, make sure it's the correct brand setting according to your car before you log in.

How to Connect Online ODIS with Geko Online System?

• -- Connect the 5054/6154 USB interface to laptop and obd CAR OBD2 Port when you have the car ready to test,

• -- Run your ODIS software, check your odis brand setting of connection, make sure it's correct brand setting according to your car before you login.

• -- Start diagnostic and scan all module lists, step by step until reach to the screen which the ODIS asking you enter Geko user info.

• -- Run the GEKO SYSTEM. Put into to code and then click enter, it will automatically enter GEKO username and password in seconds.

•  

• What you can not do ?

1, Original factory is not allowed online operation. e.g.

Ø  Illegal modification of vehicles.

Ø  Matching illegal parts.

Ø  The vehicle was not allowed to be modified by the tool.

2, software version is too old caused can not support online ,

• What you need prepare.

1, One dealership level diagnostic tool VAS5054A, VAS5055, VAS6154 VCI which compatible with original ODIS software

2, One laptop with ODIS-S software ready..
3, Good network connection

Any questions, feel free to contact us.

WhatsApp: +86 13510112342

Skype: ECUKEYS

• What you need prepare.

1, One diagnostic tool VAS5054A, VAS5055, VAS6154 VCI which compatible with ODIS software

2, One laptop with ODIS-S software ready..
3, Good network connection