VAG PRO CAN BUS+UDS+K-line Diagnostics Interface

VAG PRO CAN BUS+UDS+K-line Diagnostics Interface

• New in Version 5.5.1:

  Support for new addresses entered in the MLB-Evo platform
  Update database-ODX (support for all models 2015)

  Major Changes in the PR encoder:

  * Now it is possible to keep PR-codes of a file
  * PR-self-sustaining encoder may select codes known PR-analysis of current data stored in the ECU
  * You can compare the data stored in the ECU against the calculated data, choose what you want to download.
  * OCF “Activating automatic folding mirrors”, the problem is illuminated space around the machine solved – Thanks Ciamardo / vcp-forum.de
  * The new team in the Scripter: GetCardSerial, returns the current smart card number. You can use it to prepare a script that will run only on these smartcards.
  * Enhanced TXT-coding, coding calculation is now faster APDUs.
  * Updated data base DTC- Fixed problems with parameterization 7N0 cameras
  * Fixed problems with parameterization 5M0 …… F AFS modules
  * OCF new section called “Apps”, which is: Download the parameter data, coding for PR-code, BCM, and so forth programmer..
  * The new procedure OCF “FlashFile Dumper” – can extract content from Flash files (*
  .SGO, * .FRF, * .ODX) in a binary dump. Note: The source data format is not changed, *
  so that if a Flash file kriptovat and compressed, the binary file will be the same.
  * Fixed an issue in the Gate-way Sheet MLB-EVO (B7 II, A4 B9) – not all ECU were available through the Gate-way.
  * Updated database of error codes (added more than 200 new codes, including the MQB / MLB-EVO platform)
  * New Firmware v.1.1 for interfaces (04.0D / 02.04) v.2.0 (0A.04 / 0B.04) to support new protocols (TCP-IP) used on the MLB-EVO platform
  * Fixed a connection problem with the address 46 (room unit) on the MLB-EVO (B9 A4 / Q7 4M) platform
  * Reduced time delays during the loading of large data blocks in the non-flash modes.

  This contributes to a more stable connection when connected directly to the ECU (Direct Connect), popular among fans VAG.
   

  Supported Cars:

  1. Audi
  A2 2009-
  A3 8P 2003-
  A3 – platform MQB-
  A4 model 8E wariant B7 (Engine, transmission, airbags, ABS, park) 2005-
  A4 model 8K wariant B8 (UDS + TP2.0) 2008-
  A5 model 8K (UDS) 2007-
  A6 model 4F 2004-
  A8 model 4E 2003-
  Q3 (UDS) 2010-
  Q5 (UDS) 2008-
  Q7 (TP2.0 + UDS) 2006-
  S5 model 8K
  (R)S6 model 4F
  R8 (UDS)
  TT model 8J 2007-

  2. Mercedes
  Sprinter (VW Cra-fter) – – Only the engine and immobilizer

  3. Seat
  Altea
  Leon MQB 2013-
  Leon model 1P 2005-
  Toledo model 5P 2004-
  Exeo 2008- (Engine, transmission, airbags, ABS, park)

  4. Skoda
  octavia model 1Z 2004 –
  octavia platform MQB –
  superb II B6 2008-
  fabia model 5J 2007-
  yeti 2009-

  5. Volk-swagen
  Cra-fter (immobilizer, engine)
  Caddy model 2K 2005-
  Eos
  Golf V model 1K
  Golf VI model 5K
  Golf VII platform MQB
  Golf Plus
  Jetta II model 1K
  Transporter / Multivan (Only after the CAN-BUS drive for storing data)
  Multivan/Transporter GP model 7E (UDS) 2009-
  Passat B6 model 3C 2005-
  Passat CC-
  Phaeton GP 2007-
  Polo model 6R 2009-
  Polo FL MQB 2014-
  Scirocco III-
  Touran-
  Tiguan-
  Touareg GP 2007-
  Touareg NF 2010

  6. K-line ( KWP1281, TP/KWP2000)
  – VW Golf III, IV
  – VW Passat 3B
  – VW Bora
  – VW Transporter T5
  – VW New Beetle
  – VW Polo II,III,IV
  – Skoda Octavia I
  – Skoda Fabia i i II
  – Seat Leon I
  – Seat Toledo II
  – Seat Alhambra
  – Seat Ibiza II, III, IV
  – Audi A2,A3,A4,A6 K-Line
   

  Notes for Audi A4:

  1. Option A4 8E B6 model
  This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.

  2 .Model A4 8E, B7 option
  This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so- called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.
  In addition, a standard K-line. In other words, VCP fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.
   

  Package including:

  1pc x VAG PRO
  1pc x Encryption Dog