FEM BDC Module Testing Platform for BMW F20 F30 F35 X5 X6 I3
- Designed With LCD Disply, easy to see the result when detect FEM BDC Control Moduel in good condtion.
- No need to test them on the car, No need start-stop button.very convenient and efficient:Can works alone or works with BMW FEM key programmers, i.e Yanhua BMW-FEM,BMW Explorer, VVDI2 BMW, CGDI Prog etc
- – Insert the adapters into the BMW FEM /BDC testing platform.
- – Connect well the harness and turn the ignition switch to the OFF status, ensure the voltage is 12V.
- – Put the FEM key into the sensing area. press the “Enter” button and the red LED lights up.
- – Press the “Enter” button, the screen displays FEM BDC TESTS: 11.2V, the battery icon on the screen lights up, means it starts OK.
- – Again press the “NETER” button and ACC OK, Again press the “ENTER” button and OFF OK. Then FEM BDC LINK OK,
- – If no link to FEM BDC, it displays: NO FIND FEM BDC HOST. Your module is bad communication and need to repair or replace.
- Power supply: 14V 5A dedicated
Package List:
1pc x BMW FEM /BDC Testing Platform
1pc x Cable