FNR Key Prog 4-in-1 Key Progammer For N*issan Ford R*enault

FNR Key Prog 4-in-1 Key Programmer

Top 4 Reasons To Get FNR Key Prog:

1. Ford  Key Prog+ R*enault Ford Key Prog+ N*issan Ford Key Prog+ Ford Incode Calculator
2. Very simple and user-friendly software interface,You do not need any PIN codes or access to R*enault.net
3. You can program up to 4 blank keys/cards, Automatic remote control unit programming
4. Software Version:
Ford Key Prog: 1.1.2
R*enault Key Prog: 2.3.1
N*issan Key Prog: 2.3.1
Ford Incode Calculator: 1.0

Notice: Can't be Updated

Ford Key Prog

Ford key programmer 1997-2011
Ford key programmer is an affordable, high performance, PC to vehicle programming interface,working by obd2,supporting different ford cars from 1997 to 2011.With the ford key programmer,you can clear the keys and add new keys.
 
Model List

Transit Connect (2007-2011)
Focus (2004-2011) non-prox
Fusion (2002-2011)
C-Max (2003-2010)
Cougar (1998-2002)
Fiesta (1998-2002)
Fiesta (2002-2008)
Focus (1998-2004)
KA (1998-2000)
KA (2000-2008)
Mondeo (1998-2007)
Puma (1997-2001)
Transit (2000-2006)
Transit Connect (2002-2007)

R*enault Key Prog: key programming and pin code retrieval system!
R*enault key prog ,allow you to add a blank key or card for many of NEW R*enault and N*issan cars via OBD-2 socket. You DO NOT NEED any PIN code! Software would program keys/cards AUTOMATICALLY. it is for R*enault and N*issan based vehicles using HITAG-2 keys/cards - with the 12 character pincode.

The programmer connects to the vehicle through the diagnostic connector, and with the PC software supplied shows the true dealer code from the vehicles. Simply click on 'Program' and it will prompt you through the programming sequence for learning new keys/cards to the vehicle.

Naturally once the Pincode is retrieved you can also use it for any security/coding/replacement of R*enault body control UCH ECUs.

This functionality will require a R*enault Clip or DEC Superscan.This programmer is designed for pincode reading and key programming solution by OBD solution for the R*enault.

Models Covered
Clio II
Laguna Ph1/Ph2
Espace Ph1/Ph2
Velsatis II Ph1/Ph2
MeganeII
ScenicII (<2007)
Kangoo Ph2
Kubistar
Master Ph1/Ph2
Movano
Interatar
TraficII
Vivaro
Primastar
MeganeII
scenicII (>2007)
 
N*issan Key Prog: This covers pincode reading / key programming on these car systems with a mechanical key (non proximity) to the present day.
N*issan Micra K12
N*issan Note : Additional Security Pincode reading / key programming for the N*issan Micra K12 and N*issan
 
Ford Incode Calculator: Ford  incode Calculator for 6 or12 Character: Supportted Car Models: FORD CARS.
With the  incode/outcode calculator, No need for internet access - this software does all the calculations for you, seamlessly in the background.
 you can use the INCODE, it calculates to match PCM to PATS module when installing new or secondhand FORD d*iesel pumps (INCODE calculator can be used without plugging into car). And You will need another diagnostic tool  FORD IDS to do Ford pump matching.

Packing List:
1pc*FNR Keyprog Interface with Dongle


FAQ:

Q1: I get “NO DONGLE FOUND” error, after install and plug the FNR software and USB Dongle?
A1: You need install the crack file as well, please kindly check and confirm
 
Q2: When i install the software FNR key prog 4-in-1, i follow the manual to install it, everything is right,
but i still get the error prompt "run-time error 8002invalid port number", what is the problem?
A2: For this product, usb com port need to set up to com12.

Q3: When it shows error on the screen, I click OK, then I quit the software page, why?
A3: You need to check the chip type, if it is compatible. If yes, that means this tool can not do your car.