CANEMU CAN Emulator CAN Filter 3-in-1 BMW Mercedes-Benz Renaul*t

CANEMU Emulator CAN Filter 3-in-1

• Works for both BMW, Mercedes-Benz, and Renaul*t cars
• By installing this small pcb inside the instrument module,you can make mileage correction on the new cars, and scanner can not find original mileage from CAS module, EIS module or the ABS module..

CANEMU CAN-BLOCKER can be used with these cars:

1.Mercedes S-class W221 2007+, new C-class and CLC-class W204 2008+,ML W164 2007+,GL X164 2007+,R-class W251 2007+ ,E-class W212 with NEC processor. CANEMU block odometer value from EZS (EIS). If Mercedes CAN filter is installed in EZS, dealer workshop scanner (like Mercedes StarDiagnosis or Xentry) will show main odometer mileage in EZS the same, as in instrument cluster.

Also works for older cars like E-class W211, S-class W220, Sprinter.Can be installed also in instrument cluster,but in this case in EZS-EIS will stay old odometer value.

2.BMW F-series cars CAS4. CANEMU block odometer value from CAS4 to instrument cluster and diagnostic tester. If CANEMU is installed in CAS4, dealer workshop scanner (B-M-W ICOM or INPA) will show main odometer mileage in CAS4 the same,as in instrument cluster.

CANEMU was tested on F01,F02 with 1L15Y processor,F10 and F07 (BMW GT) with 1L15Y and 5M48H processors and on F25 ( new X3). After CANEMU instalation diagnostic tester (BMW ICOM or INPA) shows in CAS4 the same mileage as on instrument cluster.
 

3.Renaul*t Laguna III 2008+, Scenic 4 2009+, Megane III 2009+.If CANEMU is installed in cluster, no need for ABS programmig, just change original odometer value in dashboard (instrument cluster)