PP2000/Lexia-3 Citroen/Peugeot Diagnostic

Auto Scanner Categories

Recently Viewed Items

#######
Item No. 3530003
Item Name PP2000/Lexia-3 Citroen/Peugeot Diagnostic
Item Price US$69.99
Weight 1025 Gram
Quantity 101 PCS in stock now!
I want buy PCS
  
  
Introduction for PP2000/Lexia-3 Citroen/Peugeot Diagnostic
LEXIA-3 Interface latest version, works for both Citreon and Peugeot! Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connectoror via manufacturer-specific connector. This item 100% works fine. It is tested by tens of users.
Descriptions for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

Caution: Please don't try to disassemble the machine. No warranty if the machine is disassembled!

Description

PP2000/LEXIA-3 Interface latest version, works for both Citreon and Peugeot!

Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.This diagnostics software allows you to perform complete diagnostics of all from 1995 untill present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Supported functions

Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

The following diagnostic functions are supported:

Read identification

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

Read fault codes

Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").

Program supports report printing or copy to clipboard.

Clear fault codes

This function clears all stored fault codes and other diagnostic information.

Auto-scan (complete car scan/test)

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

Measured Values

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

Actuator test

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Programming functions/Adaptation

This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

Hardware and software requirements

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Set includes:

1*Main unit with extension OBD2 cable

1*Battery clip

2*USB cable

1*Software CD for DiadBox6.01 Version 47

1*Software CD for PP2000 Version 22

Optional Adapter

* S.1279 Module for PPS2000 (Click 3530032 to buy)

30 PIN cable for Citreon Diagnostic Tool (Click 3530033 to buy)

Instruction for Installation and Activation for PP2000

GO TO YOUR COMPUTER'S CONTROL PANEL

SET THE AREA/LANGUAGE TO USA/ENGLISH

START THE INSTALLATION

Activate after installation. The Key Gun is included in the software

Supported Languages


Scan ECUTOOL QR code to order by mobile phone

Contact Information:
Live Support: Chat with us online
Common Questions: info@ecutool.com
Technical Support: support@ecutool.com
Complains: complains@ecutool.com
MSN: info@sinosells.com
Skype: wangbaiyi
Facebook: www.facebook.com/ecutoolwang
Ask A Question: You can go to your member centre and submit your questions.

If you are not satisfied with our customer service staff, please send email to complains@ecutool.com.

Video for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

Software for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

Documents for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

  • Not Available

Configuration for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

1*Main unit with extension OBD2 cable

1*Battery clip

2*USB cable

1*Software CD for DiadBox6.01 Version 47

1*Software CD for PP2000 Version 22

F.A.Q for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

Not Available

More...Related Items for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

Comments for PP2000/Lexia-3 Citroen/Peugeot Diagnostic

    by kayabilir, 22:17:00, 2011/1/2
hi frend Ineed pp2000 22or last version because 22.14 dont vork update help me

Replied, by admin, at 17:26:00, 2011/1/7

Hello, can you tell me the detail information why it doesnot work?

    by srecko65, 18:42:00, 2011/1/12
s

Replied, by admin, at 09:47:00, 2011/1/13

Hello, I donot understand.
Thanks.

    by Freund_1, 02:55:00, 2011/1/22
Hello,
i recieved a defective Interface from you. Tested with another Interface also from you from a friend of mine. How to sent it back quicklyest way to become a tested Interface from you. Or should i buy another and if defektive is back to you?

Replied, by admin, at 10:39:00, 2011/1/24

Hello, can you offer the detail information to me? Then i can ask our engineer what problem it is.
Thanks.

    by Freund_1, 03:43:00, 2011/1/25
Hi shure,

there is no reading (contact) to any ECU in the car. Computer knows the interface and software starts normaly. Interface reads no Fin from car and no chance to come in ECU for reading fault codes. With other interface all is okay.

Replied, by admin, at 12:04:00, 2011/1/25

Hello, this item never has the problem, did you set rightly?
Pls send the screen shot into the email address: info@ecutool.com
Thanks.

    by Freund_1, 01:14:00, 2011/1/28
Please, don't wast my time. I do diagnosis over 20 years. Work with much equipment. I tested Software Installation with another Interface one from friend of mine that also bought from you (i told you before). And you ask me for screenshot's? Give me Adress from you to sent it back. You can test it self at car and make your owen screenshots during the hole night, if you think. :-(

Replied, by admin, at 09:33:00, 2011/1/28

Hello, I am sorry, I just want to solve your problem without paying money, if you say so, you can send it back to repair.
Return Address

JIN LI DING
ROOM 416, BUILDING B6
HUA TONG YUAN WU LIU ZHONG XIN
MIN ZHI DA DAO, LONG HUA, BAO AN
SHENZHEN, GUANGDONG
CHINA
POST CODE: 518000

Note: To avoid customs problems, please make sure return the faulty items to us by EMS, or ship it by air post from your local post office. Never use UPS/DHL/TNT/FEDEX!!!

    by Freund_1, 15:13:00, 2011/1/28
Thanks!

Replied, by admin, at 16:03:00, 2011/1/28

Hello, you would better send it back after 10 days later, because we will not work during the spring festival.
Thanks!

    by rickys auto, 11:52:00, 2011/2/7
i have latest software will it work with this interface

Replied, by admin, at 18:03:00, 2011/2/10

Hello, you would better use our software.
Thanks!

    by rickys auto, 12:22:00, 2011/2/14
Hi having the same problem inerface and car do not communicate.Use the original and every thing is OK

Replied, by admin, at 18:34:00, 2011/2/14

Hello, pls send me the screen shot about the problem in the email address: info@ecutool.com
Thanks!

    by pittbule, 16:56:00, 2011/9/9
hi i paid pp-2000 ...my device dont work... but i repair this trouble.It is fault of people which did this product

Replied, by admin, at 15:43:00, 2011/9/13

Hello, what problem do you have with PP2000?
Can you send your problem to this email address support001@sinosells.com?
He will solve your problem as soon as possible.
Thanks!

    by lyon99, 06:32:00, 2011/10/31
hi i want to buy pp2000
what do i

Replied, by admin, at 14:28:00, 2011/10/31

Hello, you can make an order directly.
Thanks!

    by Manny, 20:04:00, 2012/6/11
Take very long to download. Is there another way... can you send me a down load via cd

Replied, by admin, at 18:24:00, 2012/6/12

Hello, do you buy it from us? Do you have any new order? we can send a new CD to you.
Thanks!

    by manny, 16:01:00, 2012/6/13
Yes.... 3453-7606-0198-6537 Invoice ID : 98110914149

Replied, by admin, at 17:46:00, 2012/6/13

Hello, what i mean is your new order, do you need to buy something? Or you pay the shipping fee, we send you CD.
Thanks!

    by manny, 18:58:00, 2012/6/13
I had the PP2000/Lexia-3 Citroen/Peugeot Diagnostic tool checked by Citroen South Afica agents .... it is faulty...

Replied, by admin, at 15:49:00, 2012/6/14

What do you mean? Is the devie damaged?
If so, you can send it back to repair.
Thanks!

    by rpeter76, 21:14:00, 2012/6/14
Hallo,

Working this version with Citroen C5 and Peugeot 307 ok?
I heard an another version, there is problems with this cars...

Thank you!
BR

Replied, by admin, at 16:48:00, 2012/6/15

Yes, our version can work.
Thanks!

    by mecbia, 03:30:00, 2012/8/28
Hello, I want to know if this product includes the latest version and what are the models of vehicles that can be used as I have heard that in the previous version could not scan 3008 peugeot for example

Replied, by admin, at 18:36:00, 2012/8/29

Software CD for LEXIA-3 Version 45

Software CD for PP2000 Version 22

Thanks!

    by Victor123, 05:25:00, 2012/10/18
What the last version of DiagBox can work with it scanner?

Replied, by admin, at 17:04:00, 2012/10/18

Software CD for LEXIA-3 Version 45

Software CD for PP2000 Version 22

Thanks!

    by bledazzled, 14:39:00, 2012/10/19
When i do payment, what email send information about payment?

Replied, by admin, at 11:09:00, 2012/10/20

You can send to this email: info@sinosells.com
Thanks!

    by semir, 19:14:00, 2015/4/5
Hi friend I have connection with peugeot 307 2003y problem can you help me
I have try 2-3 time reinstallation software but same problem VIN I tape than DAM and come only pp2000 and diagbox but this only can not found the car

Replied, by admin, at 09:09:00, 2015/4/9

Hello:
what type is your car engine? PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.

    by semir, 05:34:00, 2015/4/10
the car is 307 2,0 hdi rhr sid 803
with simens ecu

Replied, by admin, at 10:20:00, 2015/4/20

sorry. it can not work on your 307

    by semir, 05:12:00, 2015/4/18
Hallo every body this version dont work fine
I have not conektion with 206,3x307,207,xsar picaso
but c5 III and c4 Picaso all the best
I dont now wath ist problem,I think is interface to bad quality

Replied, by admin, at 10:19:00, 2015/4/20

i am sorry for hear that.it can not do all functions as the original. but you know it is really a cheapest tool

    by semir, 07:26:00, 2015/4/26
Ok tell me way from`´ xy´´ shop this funktioniert I have buy end is all ok but from you dont work BAD product only this
Sory but this is truth

Replied, by admin, at 13:17:00, 2015/4/29

please contact our support team by email to support@ecutool.com

    by alnikpod, 04:50:00, 2015/6/3
what references your device:921815C/

Replied, by admin, at 10:26:00, 2015/6/10

sorry?

Rating:
Code:
Join our community:
Newsletter get Coupon:
 

Home

ViewCart

UserCenter
Add To Cart