What is HTprog programmer?
HTprog is the latest programming equipment for the automotive electronics industry.
-Can do chip tuning, DTC removal, adblue removal EGR cancellation, DPF cancellation, hot start, speed limit release, IMMO off , etc . and make ECU-related operations by reading and writing ECU.
-Can also read and write car body modules, such as CAS, SZL, FRM, AIRBAG, EZS, BCM, etc. With this function, you can easily deal with matching keys, unlocking anti-theft, adjusting instruments and repairing airbag computers, etc.
-For the repair, calibration and replacement of automotive electronic modules, it can even refresh the key, so that the old key can be a new key and continue to match other vehicles.
Attention
1. Uninstall any antivirus software and disable the firewall before using the HTprog.
2. Do not to upgrade the software to avoid any potential damage to the hardware.
3. Activation of the HTprog is necessary and should be done using the user's registered email address.
4. Works online with an internet connection every time.
HTprog full version Features
- HTprog includes MPC Module, EEPROM module, BDM adapter, Tricore adapter, Dongle
- Works alone and no need to work with ECUHELP KT200
- Support ECU Chip tuning / ECU Clone
- Read and write car body modules such as CAS, SZL, FRM, AIRBAG, EZS, BCM, etc.
- Upgraded Version: the hardware is reworked to be better, and some bugs are fixed.
[Upgraded Version] HTprog Update on June 25, 2023:
The hardware is reworked
Some bugs are fixed
BMW CAS3 0L15Y0M23S p-flash Read: OK
BMW CAS3+ Vin Edit, eeprom &flash read/write: OK
BMW 080D0WQ eeprom read/write, mileage edit: OK
Jtag function is working fine
M35080 is working
......
HTprog Functions:
Chip Tuning / ECU Cloning
With HTprog you can read and write P-Flash,D-Flash, External Flash and external EEPROM with the option of automatically checksum correction, you will have many methods in most of ECUS :
1. Factory mode (On Bench for most of ECU/TCU): with this option you don't have to open the ECU cover. Just plug some wires for power and signals and you are ready to go.
2.Tricore Boot Mode for all Tricore ECU: Opening the ECU is mandatory to connect the boot wire on the ECU board.This method is useful when the ECU is not responding
3.BDM (Background debug mode)
4.JTAG for Renesas and Freescale
BDM Read / Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW. EIZ / EIS in Mercedes Benz. BCM in Volkswagen and Porsche.etc.
Built in Editors
With HTprog you can edit many Flash data like:
Edit CAS3+ VIN, ISN and keys
Edit CAS4,CAS4+ VIN,and ISN
Edit mileage for BMW instrument clusters
Other functions
You can do key reset for many brands like Audi, BMW,MIN, Porsche, Toyota,Fiat, Renault...etc.
Read/Write a wide range of SOP8 EEPROMS.
Works side by side with Autohex to make keys.
Key Features
Master version. One License for all protocols on bench.
Supports one of the largest ECU/TCU list in Cars and Trucks for ECU cloning and Chip Tuning. Supports both old and latest ECU / TCUs from Bosch,Continental, Delphi, Marelli,Denso, Tenic,TRW and Valeo.etc.
Reads all BMW long ISN from BMW DME and DDE including MD1 and MG in F/G series
IMMO BDM Read/Write
With HTprog you are able to break the protection of immobilizers like CAS in BMW, EIZ / EIS in Mercedes Benz.BCM in Volkswagen and Porsche...etc.
The following 3 Images showing HTprog read/write P-Flash of EDC17C53 with no issue:
HTprog Full Package List:
1pc x HTprog main unit
1pc x MPC Module
1pc x EEPROM module
1pc x +12V Power Supply
1pc x BDM adapter
1pc x Tricore adapter
1pc x USB
1pc x Software Dongle
About the HTprog clone adapter, cable andd dongle
1. KT200 HTprog Clone Adapter features
- Read and Write ECU Support Bench / BOOT / BDM Mode
- Read and write car body modules
- For the repair, calibration and replacement of automotive electronic modules, it can even refresh the key
- Must work with KT200, not work alone
Package List:
1pc x HTprog main unit
1pc x USB cable
1pc x Tricore adapter
2. the HTprog Software Dongle
- HTprog dongle is available for sale separately
- With this dongle, HTprog clone adapter will work without connecting to KT200 device.
3. The Cables of HTprog Standalone ECU Clone Tool (Incl. BDM / MPC / Tricore Module)
Package List:
1pc x MPC Module
1pc x EEPROM module
1pc x +12V Power Supply
1pc x BDM adapter
1pc x Tricore adapter
