Categories
Recently Viewed Items
Home >> Reset Programmers>> Chip Programmer
XPROG-m XPROGm XPROG m V5.0 Full Authorization
Item No. 3515040
Item Name XPROG-m XPROGm XPROG m V5.0 Full Authorization
Item Price US$65.99
Weight 700 Gram
Quantity 101 PCS in stock now!
I want buy PCS
      

Introduction for XPROG-m XPROGm XPROG m V5.0 Full Authorization

This is X PROG-m V5.0 full authorization. All functions work well.

Descriptions for XPROG-m XPROGm XPROG m V5.0 Full Authorization

CAUTION! PLEASE DON'T TRY TO UPDATE THIS ITEM! OTHERWISE IT MAYBE LOCKED!

 

XPROG-m V5.0 Full Authorization

Product description:

This is X PROG-m v5.0 full authorization.All function work well.

NEW!!! We can offer authorizations below and 18 pcs adapter.

 

Authorizations:

Eeprom read and write

Motorola HC05 family authorization (allows to read/write EEPROM)

Motorola HC08 family authorization (allows to read/write EEPROM)

Motorola HC11 family authorization (allows to read/write EEPROM)

Motorola HC(S)12 family authorization (allows to read/write EEPROM and flash memory)

Texas Instruments TMS370/TMS374 family authorization  (allows to read/write EEPROM)

Motorola HC05B/X family bypass security authorization (allows to read/write secured EEPROM and flash memory)

ST M35080 read/write/erase authorization

BMW EWS3 authorization

ATmega family authorization (allows to read/write EEPROM and flash memory)

MB ZGS001 authorization

Motorola HC11EA9/E9 bypass security authorization  (allows to bypass security bit and read EEPROM and RAM memory)

National CR16 authorization (allows to read/write EEPROM memory)

ST7, ST10 family authorization (allows to read/write serial  EEPROM)

MPC5xx  authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)

Motorola HC12, HC912, MC9S12, MC9S12X  bypass security authorization (allows to read/write secured EEPROM and flash memory)

ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)

ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, chassis number (VIN), serial number and PIN code).

 

 Package:

main board

XPROG-m

1

chip

TMS370

3

TMS374

2

HC11E9/EA8

1

HCO5Bx

2

MC68HC05V12

1

M35080

1

EEPROM

1

EWS3

1

QFP64

1

QFP28

1

QFP80

1

QFP112

1

QFP114

1

B023RRD8

1

cable

7PIN

1

USB cable

1

 


Contact Information:
Live Support: Chat with us online
Common Questions: info@ecutool.com
Technical Support: support@ecutool.com
Complains: complains@ecutool.com
MSN: info@sinosells.com
Skype: wangbaiyi
Facebook: www.facebook.com/ecutoolwang
Ask A Question: You can go to your member centre and submit your questions.
Address: Shenzhen BaoAn Longhua MinZhi Boulevard HuaTongYuan Logistics Center B6-416

If you are not satisfied with our customer service staff, please send email to complains@ecutool.com.

Video for XPROG-m XPROGm XPROG m V5.0 Full Authorization

  • Not Available

Software for XPROG-m XPROGm XPROG m V5.0 Full Authorization

Documents for XPROG-m XPROGm XPROG m V5.0 Full Authorization

  • Not Available

Configuration for XPROG-m XPROGm XPROG m V5.0 Full Authorization

F.A.Q for XPROG-m XPROGm XPROG m V5.0 Full Authorization

Not Available

More...Related Items for XPROG-m XPROGm XPROG m V5.0 Full Authorization

Comments for XPROG-m XPROGm XPROG m V5.0 Full Authorization

    by dellorto, 00:39:00, 2011-1-4
are all authorizations including in the price?

Replied, by admin, at 18:39:00, 2011-1-5

yes, please read the descriptions. thanks!

    by m-19610617-a, 00:20:00, 2011-1-10
X prog M doesn't write processors

Replied, by admin, at 09:39:00, 2011-1-11

Hello, it can write processors.
Thanks.

    by smarttec, 08:20:00, 2011-1-15


I have purchased this product from you recently, but unfortunately does not work you have promised pleasant to me what do I do this problem
Programmed to operate the software and see the program I can not read anything
Please the solution with thanks

Replied, by admin, at 10:09:00, 2011-1-15

Hello, I am very sorry, please send me the screenshot about the problem to email address: info@ecutool.com
Pls tell me the order number.
Thanks.

    by smarttec, 09:20:00, 2011-1-16
I'm send to you screen shot for my Problem in xprog-m

Replied, by admin, at 21:07:00, 2011-1-17

Ok, thanks. We will check it for you.

    by m-19610617-a, 02:33:00, 2011-1-20
With processors the problem doesn't write 05 series on BDM doesn't read

Replied, by admin, at 09:57:00, 2011-1-21

Hello, our website does not write it can works on BDM, please read the description.
Thanks.

    by m-19610617-a, 04:44:00, 2011-1-22
Processors 912 and 9s12 READ / Wriet on BDM a manual to X PROG m

Replied, by admin, at 10:41:00, 2011-1-24

Hello, i do not understand.
Thanks.

    by Romcik, 03:22:00, 2011-2-19
are all 18 adapters including in the price?

Replied, by admin, at 10:15:00, 2011-2-19

Yes, it is.
Thanks!

    by Romcik, 15:53:00, 2011-2-19
In item name version is 5
In intoduction 4.5

So, version 5 or 4.5 ?

Replied, by admin, at 15:00:00, 2011-2-21

Hello, it is version 5 now.
Thanks!

    by jsautos, 00:52:00, 2011-3-8
Does the software work in Vista 64bit?

Replied, by admin, at 09:32:00, 2011-3-8

No, it does not, you must work in windows XP.
Thanks!

    by sikoad, 16:39:00, 2011-4-5
Please confirm, what it will not be blocked after a lot cycles of prograaming chps. Thanks.

Replied, by admin, at 16:17:00, 2011-4-6

Hello, it will not be blocked after a lot cycles of prograaming chips.
Thanks!

    by Weske2000, 03:28:00, 2011-5-29
Including adaptor from the picture

Replied, by admin, at 14:23:00, 2011-5-30

Yes, it includes the adaptor in the picture.
Thanks!

    by weske2000, 21:34:00, 2011-6-7
my xprog m say

bypasssay
bypass security

Replied, by admin, at 10:40:00, 2011-6-9

Hello, can you try another chip?
If you any problem, you can send email to us.
Thanks!

    by weske2000, 20:14:00, 2011-6-9
I've tried other chips

hc05bx adapter should I use?

Replied, by admin, at 17:57:00, 2011-6-10

Hello,
You can use these Motorola HC05B/X family and Motorola HC11EA9/E9
Thanks!

    by mimo, 05:02:00, 2011-9-23
hello my friends I want to know if I can buy your equipment in France whether an address thank you

Replied, by admin, at 17:30:00, 2011-9-23

Hello, i am sorry, you can buy from us on our website, we send it to your address.
Best regards

    by jsautos, 04:58:00, 2011-11-16
hello

We have a X ProgM from yourselves and have never been able to read processors. It reads 8 pin eeprom good but no processor. Today i have MC68HC05B6 which it will not read in adapter. Have read with UPA-USB on the board instead.

Can you please advise why it will not read. It just sits there saying "Initialising device" and doesnt do anything else.

Replied, by admin, at 17:13:00, 2011-11-16

Hello, Due to the limitation of the test, we cannot test all of the chip, some of the chip may not be supported.
If you did not connect the wires wrongly, you can test another type chip, and send us the screenshot of the information of testing.
Thanks!

    by Sodan, 21:05:00, 2012-1-4
Atmel atmega xx and Microchip PIC MCU not work!! Buttons read and write its grey, work only erase and blank check. For others manufacturers (motorola,nec,tms work all correctly) Please, find full working software and paste here new link to download!! Thanks. I type to your support with picture month before...sorry for my bad english

Replied, by admin, at 18:01:00, 2012-1-5

Hello, xprog does not support MCU/MPU,Atmel and Microchip function.
Thanks!

    by zaheradidas, 09:36:00, 2012-1-9
hello. can this programmer read/write mc68hc11e1fn plcc 52-mc68hc11ek1cfn3 plcc 84- ship cost to syria by DHL - it includes the adapters for this two kinds.thanks

Replied, by admin, at 17:17:00, 2012-1-9

Sorry, our engineer said this item does not support it, you can buy other programmer.
Thanks!

    by amr, 00:20:00, 2012-2-10
my x prog m is locked
what can i do to unlock it?

Replied, by admin, at 15:05:00, 2012-2-10

Hello, why is it locked? Pls send the screenshots to us. Do you use the official software?
Thanks!

    by ljupco_bt, 22:05:00, 2012-2-14
mottola hc05 and hc08 and hc011 cant write ..?

Replied, by admin, at 17:29:00, 2012-2-15

Eeprom read and write

Motorola HC05 family authorization (allows to read/write EEPROM)

Motorola HC08 family authorization (allows to read/write EEPROM)

Motorola HC11 family authorization (allows to read/write EEPROM)

Motorola HC(S)12 family authorization (allows to read/write EEPROM and flash memory)

Thanks!

    by ljupco_bt, 13:53:00, 2012-4-21
hi my x prog m is dead ..always sey ...DEVICE IS SILENT.. i cant evriting write and read eeprom..24c 93 c ..my token is finish and reset counter is finish ..what is the problem??

Replied, by admin, at 17:41:00, 2012-4-23

Hello, you need to connect the device, then set the right port, then create a folder, click help, choose device, if it can read the authorized modules. Pls connect it to the external 12V adapter.
Thanks!

    by zaheradidas, 05:21:00, 2012-4-30
hello,iconect the device by usb cable and I put hc11e9/ ea9
programming adapter PLCC52 AND choice from device as following :
I select / new
I select the right port

Type/mcu/mpu
Device/mc68hc11e1
Brand /Motorola hc 11

I select/read to read micro controller mc68hc11e1fn,the initializing start but error message showing as following:
Message: device is silent. time out error
i tried to apply 12v but no different ,when i click help choose device it can read authorized modules.
please help.
Best regards .
zaher

Replied, by admin, at 17:28:00, 2012-5-2

Hello, there is many options in EA9, you can try them all. If there is stain on the pin, you must clean it up, then connect to the adaptor.
Thanks!

    by arin, 18:55:00, 2012-5-4
hello my notebook usb is 2.0 but my xprog dosent work always say devise is silent and xprog red led became on . but it works on pc and sometime say device is silent after restarting usb device its works correctly and some times became hot .

Replied, by admin, at 10:31:00, 2012-5-5

Hello, pls check the USB cable, or change a new USB to try.
We suggest you to work it on XP 32bit.
Thanks!

    by nelglider, 08:57:00, 2012-5-14
Hello take a doubt: I bought a programmer of another company, he came defective and the seller told me to send him to return, I stolen .
I would buy from you, you buy it you guys give me support and test before you send it?

Replied, by admin, at 14:18:00, 2012-5-14

Hello, yes, you can buy from us, we can test it before shipping. When you make order, pls tell me.
Thanks!

    by nelglider, 03:25:00, 2012-5-15
Mr. Seller already made 鈥嬧€媡he purchase and payment of XPROG-m as the combined test it before shipping.
Thank you.
nelglider

Replied, by admin, at 10:56:00, 2012-5-15

Hello, we will check if it is good before shipping.
Thanks!

    by arin, 14:36:00, 2012-6-3
ihello i update my x prog and it dosent work what can i do?

Replied, by admin, at 15:53:00, 2012-6-5

Hello, pls contact email support001@sinosells.com
Thanks!

    by carmine, 15:08:00, 2012-6-14
The programmer, X-PROG, and very very good, and it works, everything ok.

Replied, by admin, at 16:16:00, 2012-6-14

Thanks very much!

    by hoangtu, 19:31:00, 2012-10-15
I reading test in 0H57A (MC68HC05H12).I have tried to com port and USB power out 12v.But error: device timeout silent error

Replied, by admin, at 19:29:00, 2012-10-16

Does t work with other chip? Do you work it on system xp?
Thanks!

    by apjmax, 12:20:00, 2012-10-20
the product is in my hand. i`ll test. some pins are blended but it`s no problem. i must test and i will send a feed back about this. thanks. the cd with the software is not in the package. how can i get it? thanks!!!

Replied, by admin, at 17:43:00, 2012-10-22

http://www.sinodownloads.com/down/download/ecutool/3515040-DPD_V50setup.exe
Thanks!

Rating:
User Name:
Password:
Comments:
Code:
   
Join our community:
Newsletter get Coupon:
 
SKP-900 | VPC-100 | Car Emulators | X-431 | TRUCK DIAG KING | Diagnostic Tools | Odometer Correction | Key Programmers
MSN: info@sinosells.com, Email: info@ecutool.com
Copyright, China ECU Tools Centre, 2007-2015
ICP Certificate No. 09097225