Categories
Recently Viewed Items
Home >> Car Diagnostic Tools>> OBD2 Code Reader
OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER
Item No. 3501028
Item Name OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER
Item Price US$25
Weight 193 Gram
Quantity 103 PCS in stock now!
I want buy PCS
      

Introduction for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000) NEW V090420

Descriptions for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

OP-COM - PC based Opel diagnostic program

It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

 

Fault codes will be shown with all available information:

Full fault code text description

Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application.

From the fault codes window, you can go directly to the measuring blocks window.

The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You can also run output tests on many controllers.

PIN6-PIN14

PIN3-PIN11

PIN1

HSCAN  - Dual-wire, High Speed CAN-BUS, 500 kbps

MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps

SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.

With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm.

You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.

You will need the vehicle security code, which can be found on the CAR-PASS.

You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B

You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.

The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

 

The package contains:

1 USB port based diagnostic interface, with USB cable

 

Software Download and Activation for Version 090420

1, Download the software in HERE

2, Unzip it, you can find 6 files.

3, Creat a OP-COM folder in C:

4, Run OP-COM-090420-PLR.exe to install it to the OP-COM folder in C:

5, Delete the OP-COM icon on the desktop.

6, Copy OP-COM-090420-PL.exe and paste it in the folder OP-COM in C:

7, Run OP-COM-090420-PL.exe in the folder OP-COM in C: (You can also send it to your desktop for quick starting!)

 

Software Download and Get Activation Code for Version 090820B

1, download software in HERE

2, run op-com-settings-revision-b-save config-ok-settings-test interface-write down serial number

3, close-back-diagnostics-1999-corsa-b-engine-x12xe

4, when activation windows appears, open winhex-tools-open ram-op-com-primary memory-search-find text-write serial number and click ok

5, push F3 until "search complete" window appears, ok, above serial number there is xxxxxxxx-xxx code (8-3)-copy first 8 characters of that 8-3 code

6, search-find text-paste code and ok-F3 until "search complete" window appears, ok, then you found a 8-8 code which is activation code


Contact Information:
Live Support: Chat with us online
Common Questions: info@ecutool.com
Technical Support: support@ecutool.com
Complains: complains@ecutool.com
MSN: info@sinosells.com
Skype: wangbaiyi
Facebook: www.facebook.com/ecutoolwang
Ask A Question: You can go to your member centre and submit your questions.
Address: Shenzhen BaoAn Longhua MinZhi Boulevard HuaTongYuan Logistics Center B6-416

If you are not satisfied with our customer service staff, please send email to complains@ecutool.com.

Video for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

  • Not Available

Software for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

Documents for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

  • Not Available

Configuration for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

1, USB Port Based Diagnostic Interface x 1 pc
2, USB Cable x 1 pc
3, CD x 1pc

F.A.Q for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

Not Available

More...Related Items for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

Comments for OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER

    by andschr2, 16:16:00, 2011-1-10
I hope this is it...

Replied, by admin, at 09:38:00, 2011-1-11

Hello, I donot understand.
Thanks.

    by SnipeR24, 06:43:00, 2011-1-17
The new version of your OP-COM 08 2010 - http://rutracker.org/forum/viewtopic.php?t=3250454
unless some functions to contact me please send me the new firmware and software for flashing via USB

Replied, by admin, at 20:47:00, 2011-1-17

Hello, this is our software link:
http://www.sinodownloads.com/down/download/ecutool/350128-OP-COM090820B.rar
We do not have other version now.

    by SnipeR24, 03:31:00, 2011-1-18
You do not understand this reference to a new software

Replied, by admin, at 09:45:00, 2011-1-18

Hello, I am very sorry, I do not know.

    by kneit, 05:09:00, 2011-2-25
Hi i can't download the 350128-op-com090820b.rar file....

can you please help me...

thanks in advance

Replied, by admin, at 16:27:00, 2011-2-25

Hello, this is the link:
http://www.sinodownloads.com/down/download/ecutool/350128-OP-COM090820B.rar
Thanks!

    by peter Li, 17:56:00, 2011-2-27
I am trying to setting and activate op-com 908.it say " Sorry,Fatal error "
What is the problems.
Thanks Peter

Replied, by admin, at 17:38:00, 2011-3-1

If you can give me a email, we will sent a help instruction to you.
Pls contact support001@sinosells.com

    by peter Li, 10:33:00, 2011-3-10
Thanks,
It is working OK,now.
Bye.

Replied, by admin, at 16:21:00, 2011-3-10

Welcome!

    by prezas, 04:00:00, 2011-3-14
what is this cable firmware version ?

Replied, by admin, at 16:14:00, 2011-3-14

Hello, the firmware version is V01.39.
We have the installation instructions.
Thanks!

    by zeken, 11:42:00, 2011-5-8
Hello. OPEL ASTRA H 2009.OP-COM doesn't see HSCAN. Why?

Replied, by admin, at 09:03:00, 2011-5-9

Hello, pls tell me your email address, I can send the user manual to you.
Thanks!

    by zeken, 04:51:00, 2011-5-16
Hello! HSCAN on the former doesn't work. The instruction hasn't received. Email ze494nya@mail.ru

Replied, by admin, at 18:37:00, 2011-5-16

Ok, PLS CHECK IT.

    by khaledismail, 06:07:00, 2011-5-17
i need to purchased OP-COM OPCOM OP COM DIAGNOSE USB V081016EN & V090420GER and i need to tell me if it is working in new models of opel or not?
regards

Replied, by admin, at 16:14:00, 2011-5-19

Hello, it can work the models before 2008.
Thanks!

    by visnuto, 22:48:00, 2011-6-4
Have you worked with a driver for windows7 please?
thank you

Replied, by admin, at 10:41:00, 2011-6-9

Hello, we usually suggest our customers to work it with windows XP system, it may work with vista!
Thanks!

    by jsautos, 17:13:00, 2011-8-7
Hello

Will Op-com programme new radio CD30 to Astra H ??

Many Thanks

Jason

Replied, by admin, at 17:18:00, 2011-8-9

Hello, it can not program radio.
Thanks!

    by SubaruGarage, 03:48:00, 2011-8-10
Hello Guys

OP Com works great, with China Clone Software, and many Language.
I have "googelt" China clone op com Software, and i have the new one in German, English....to year 2010 and works great with Bios 1.39 Version

http://www.rapidshare.com/files/426591319/OPCOM_2010_EN.exe
http://www.rapidshare.com/files/445367230/OPCOM_2010_DE.exe
http://www.fileserve.com/file/N9MUUYg/OPCOM.rar

ONLY INFO from me

I hope i can help many People


Many Thanks Realy Great tool

Replied, by admin, at 09:44:00, 2011-8-10

Thanks!
Have you tested these software with our op-com?

    by SubaruGarage, 17:38:00, 2011-8-10
Yes Tested with your OP-Com, only must Update to 1.39 and all Work

Hope can Helping this Info

Replied, by admin, at 18:13:00, 2011-8-10

Thanks!
Hello, can you send me the software by email?
info@ecutool.com

    by johndoedk, 21:58:00, 2011-10-13
Hello Subarugarage This progaram seems to finallly to work on my computer also.
But what about the update how did u did that if I may ask.

In forehand thanks.
Regards Miguel
































Replied, by admin, at 16:11:00, 2011-10-14

Hello, this item do not have update at present.
Thanks!

    by ddule, 21:42:00, 2011-10-27
Hi, I am trying to set and activate op-com 908.it say " Sorry,Fatal error... "

Please help.

Replied, by admin, at 18:13:00, 2011-10-28

Hello, this does not need activate, can you send email to info@ecutool.com?I can send user manual to you.
Thanks!

    by edin, 05:02:00, 2012-2-23
When I'm using the op-com tool by connecting to the car an through the complete dijagnostic procedures the interface give some unusual sound "tapping" , do you have any idea to slow the problem?

Replied, by admin, at 15:09:00, 2012-2-23

Hello, pls tell me your email address, i sent the user manual to your email.
Thanks!

Rating:
User Name:
Password:
Comments:
Code:
   
Join our community:
Newsletter get Coupon:
 
SKP-900 | VPC-100 | Car Emulators | X-431 | TRUCK DIAG KING | Diagnostic Tools | Odometer Correction | Key Programmers
MSN: info@sinosells.com, Email: info@ecutool.com
Copyright, China ECU Tools Centre, 2007-2015
ICP Certificate No. 09097225