MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota TIS, Honda HDS and VOLVO DIDA.
MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.
Note: Please Install Under Windows XP System.
Fully compatible with Toyota TIS, Honda HDS and VOLVO DIDA (New!!!)
Supports Diagnostics, Reprogramming, Active tests, and key programming
Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics
Fully compatible with SAE J2534
Programmable power supply
Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector
Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector
RGB status LEDs
K-Line ISO 9141
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
Operating Temperature: -20 to 70 C (-4 to 158 F)
Storage Temperature: -40 to 85 C (-40 to 185 F)
Diagnostic Interface: 16PIN
USB Interface : USB 2.0
Power: DC 5 V - 36V
Dimensions: 95mm(3.74")L x 49mm(1.93")W x 28mm(1.10")H
Net Weight: 85g
Gross Weight: 193g
User Manual: Instructions on tool operations
Driver CD: Includes user manual, drivers, and etc.
OBD II cable: Communicates between tool and vehicle
USB cable: Communicates between tool and PC/Laptop
Carry case: A nylon case to store the tool when not in use
Live Support: Chat with us online
Common Questions: firstname.lastname@example.org
Technical Support: email@example.com
Ask A Question: You can go to your member centre and submit your questions.
If you are not satisfied with our customer service staff, please send email to firstname.lastname@example.org.